Descrição

Excelente Rádio ,Memoria para 6 modelos , Mode 2.
Destalhes do Produto:detalhes do produto Tamanho? F17cm * 8.5cm * 20cmPeso? F 0,85 kg Transmissão em banda 72Mhz Modulação: FM – PPMFonte de alimentação: 9.6V bateria Ni-Cd ou 12V bateria alcalina Consumo de corrente: 250mA Receptor: R6R6F banda estreita, 72MHz receptor canal 6Tensão de alimentação: 4,8 V ~ 6V Consumo de corrente: 9.5mA @ 4.8V Standard aparece canal Canal 1: Aileron; Canal 2: Elevador; Canal 3: acelerador; Canal 4: Leme características 7? J mudança mão do acelerador flexível 8? J LCD, programação manual é habilitar. Incluindo as definições sobre D / R, SERVO INVERSÃO, EXPO, EPA, Mixer, TRIM programável, V-tail mistura, ELEVON mistura e etc 9? J função de alerta de baixa tensão 10? JTrainer cabo, poder cobrar jack.
Destalhes do Produto:

Medidas : 17cm x 8.5cm x 20cm
Peso : 850 Gr.
Transmissão 2.4 Ghz
Alimentação: 8 Plilhas AA Ni-Cd ou alcalina , Pac de Lipo
Consumo de corrente: 250mA
Receptor: R67EH 2.4gHZ 7 canais com alimentação: 4,8 V ~ 6V
Consumo de corrente do Receptor : 9.5mA @ 4.8V
Programação Incluindo as definições sobre D / R, SERVO INVERSÃO, EXPO, EPA, Mixer, TRIM programável, V-tail mistura, ELEVON mistura e etc
Função de alerta de baixa Voltagem
Entrada para Trainer cabo
6 Memórias de Modelos
Banda 2.4Ghz FHSS
6 Canais
8 Pilhas AA ou Pack de Lithium de 12v (não inclusas)
Consumo de 250Ma
Compatível com Simuladores (não incluso)
Alcance 1000 mts.
Modo 2

RadioLink T6EHP-E Digital 2.4Ghz 6CH Radio
Model Select six model memory.
Model Type helicopter programming.
RadioLink T6EHP-E Digital 2.4Ghz 6ch Radio (TX + RX)
Digital 2.4GHz 6-Channel RC system T6EHP-E which adopted FHSS 2.4GHz technology, it is applied for 3D helicopter. Owing to the most advanced 2.4GHz radio control technology, it is needless to fit crystals for both transmitter and receiver, meanwhile RC system can avoid the interaction problem best up to the advanced code matching mechanism.
Standard Programming Functions :
Model Select six model memory.
Model Type helicopter programming. (for airplane is another version)
Servo Reversing on all six channels.
Dual Rate/Exponential for ailerons, elevator and rudder.
End Point Adjustment fine-tunes servo throws on all six channels.
Digital Trim stores trim settings for each model for aileron, elevator, rudder and throttle.
Fail Safe a safety throttle setting in case of loss of transmitter signal.
Battery Fail Safe moves the throttle to a preset position when the airborne pack reaches 3.8V.
Stick Mode choose from Mode 1 through 4.
Range Checking Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away.
Changeable Throttle Stick select ratchet for airplanes or smooth for helis.
Adjustable Stick Length choose the length that suits your flying style.
Helicopter-Specific Programming Functions:
5-Point Normal and Idle Up Throttle/Pitch Curves.
Throttle Hold for autorotation.
Revo (Revolution Mixing) mixes rudder and pitch together.
Gyro Mixing two gyro gain settings can be programmed and selected during flight.
Swash to Throttle Mixing corrects slowing of the engine’s speed caused by the swashplate.
Swashplate Types choose from 1S (independent aileron, pitch and elevator servos linked to the swashplate), 3S (120° CCPM), or 3E (90° CCPM).
Swash AFR Adjustable Function Rate, for use with 1S, 3S or 3E swash types

Transmitting on 2.4G band
Modulation: FHSS
Power supply: 9.6V Ni-Cd battery or 12V alkaline battery
Current drain: 250mA
Receiver: R6EH
R6F narrow band, 2.4GHZ 6 channel receiver
Power requirement: 4.8V~6V
Current drain: 9.5mA at 4.8V
Size: 17cm*8.5cm*20cm
Weight: 0.85kg